Messages – Roland CD-2 User Manual
Page 87

87
Reference
Reference
Messages
If a message is displayed, refer to the following list and take the appropriate action.
Message
Content
Action
Blank Disc
The disc is blank (empty).
Use a CD-R/RW disc that is not blank.
CD Disc Busy
The disc could not be read/written in time.
If this appears during playback, use an
unscratched disc. If this appears during
recording, use a recommended brand of disc.
CD Disc Full
The disc is full. No more tracks can be recorded.
Record on another disc. Delete unwanted tracks
to increase the free space (CD-RW disc).
CD Track Full
You have reached the maximum number of tracks
(99) that can be recorded on a disc. No more tracks
can be recorded.
Record on another disc.Delete unwanted tracks to
increase the free space (CD-RW disc).
CD Read Failed
Failed to read a disc.
Use a disc that is not scratched.
CD Write Failed
Failed to write a disc.
Use a recommended brand of disc.
CF Can’t Format
Failed to format the card.
Use a different card.
CF Card Full
The card is full. No more tracks can be recorded.
Delete unwanted tracks to increase the free space.
CF No Enough Mem
The card does not have enough free space for the
operation.
Delete unwanted tracks to increase the free space.
CF Track Full
You have reached the maximum number of tracks
(99) that can be recorded on a CF card. No more
tracks can be recorded.
Delete unwanted tracks to increase the free space.
CF Was Removed
The CF card was removed while reading or writing. Keep the CF card inserted while the power is
turned on.
Count-in REC
Recording will begin after a count-in.
—
Divide Multiple
The track will be divided for writing on multiple
discs.
—
Finalized Disc
The disc has been finalized.
Use an unfinalized CD-R/RW disc.
Improper Disc
The disc is an inappropriate type for the operation
you are attempting to perform.
Use a disc that is appropriate for the operation.
Not A CD-RW
The disc is not a CD-RW disc.
Use a CD-RW disc.
No Title
No title has been entered.
Assign a title of one character or more.
Not SMF Disc
The disc cannot be played back by the SMF player
function.
Use a disc that contains SMF files.
REC Too Short
You can’t stop recording because the elapsed
recording time has not reached four seconds.
The track number can’t be assigned because the
location selected is less than four seconds after the
previous track number.
Each recording must be longer than four seconds.
Assign track numbers at intervals of four seconds
or greater.
SMF Too Big
The SMF file exceeds the size (1 MB) that the CD-2
can play. Playback is not possible.
Use an SMF file that the CD-2 is able to play.
Short Of Capa
You can’t assign a CF track that exceeds the
available CD-R/RW disc space.
Either use another disc, or assign a smaller CF
track.
Tr is Too Short
You can’t trim or divide because a track can’t be
shorter than four seconds.
—
Unsupported CF
The CD-2 is unable to use this CF card.
Use a different card.
Unsupported File
The CD-2 is unable to play this SMF file.
The CD-2 can play only Format 0 SMF files.
Waiting Signal..
Waiting for audio input to trigger recording.
To begin recording, input an audio signal.
Messages
CD-2.e.book 87 ページ 2005年2月20日 日曜日 午後4時28分