Roland CD-2 - Manual (Page 54)

54
Other Recording Methods
Automatically Starting Recording When Sound Begins
You can have the CD-2 start recording when it detects sound
that is louder than a specified level.
If you start recording the usual way, by pressing a button, a
length of silence will be recorded until you begin playing your
instrument. However, if you use the CD-2’s Auto Rec Start
function, recording will start automatically in response to
your voice or instrument, letting you record without creating
a length of silence at the beginning of the track.
HINT
• If you record on a CF card, you can delete unwanted
silence at the beginning of the track after you’re finished
recording (
Page 60).
MEMO
• The Auto Rec Start function will not operate if you’ve
enabled a count-in ( Page 53). You must turn the
count-in “Off.”
1
Make preparations for recording.
• If you’re recording with the internal mics
Page 30, Steps1–2
• If you’re recording from a connected mic or
instrument Page 31, Steps 1–3
2
Press until “Auto Rec Start” appears
in the display, and then press .
• You can also select this item by turning [DATA].
The following screen appears.
3
Turn to specify the level at which
recording is to start
automatically.
4
Press twice.
You’re returned to the previous readout.
This completes preparations for automatically starting
recording.
5
Press .
• Press the button that controls the media (CF card or
CD) to which you’re recording.
6
Press .
• Press the button that controls the media (CF card or
CD) to which you’re recording.
The message “Waiting Signal..” appears, and the CD-2
enters recording-standby mode.
7
Begin playing your instrument.
When the CD-2 detects sound at a level higher than the
level you specified in Step 3, recording will start
automatically.
8
When you’re finished recording,
press .
• Press the button that controls the media (CF card or
CD) to which you’re recording.
A new track is created at the end of the CF card or
CD-R/RW disc.
MEMO
• You can press to pause recording.
Recording will begin automatically the next time the
CD-2 detects sound at a level higher than the level you
specified in Step 3.
If you pause recording, a new track will be created at the
point you resume recording.
Off: Recording will be started manually.
-6 dB –
-48 dB: This is the minimum level at which
recording will start. For example if you
choose “-6 dB,” recording will start as
soon as the CD-2 detects any sound
louder than -6 dB.
CD-2.e.book 54 ページ ２００５年２月２０日 日曜日 午後４時２８分