Roland CD-2 User Manual
Page 41
41
Playback
You can make fine adjustments (of less than a semitone) to the
pitch of the CD playback.
Sometimes when you are practicing your instrument along
with a CD, you may have difficulty because the CD playback
is pitched slightly different than your instrument. In such
cases, you can adjust the CD playback pitch to match your
instrument.
Even if you’re using an instrument that is not easily tuned,
such as an acoustic piano, you can adjust the pitch of the CD
so that it matches your instrument.
MEMO
• Pitch adjustment is a CD-only function. You can’t use it
with a CF card.
1
Press
until “Pitch” appears in the
display.
2
Turn
to adjust the CD playback
pitch.
• The range of adjustment available for the pitch is
-50 cents through +50 cents.
• A setting of “0” produces the original pitch.
HINT
• If you have a CD that was recorded at a reference pitch
of A=440 Hz, and you want to play it back at a reference
pitch of A=442 Hz, you would set Pitch to “+8.” Refer to
the table below.
MEMO
• One cent is 1/100th of a semitone; i.e., a semitone is 100
cents.
3
Press
.
You’re returned to the previous readout.
Thereafter, the CD will play back at the pitch you
specified in Step 2.
MEMO
• Icon indication
The Pitch icon is displayed if you’ve changed the Pitch
setting.
The Pitch icon disappears if you set the Pitch to “0” in
Step 2.
Making Fine Adjustments to the Playback Pitch (Pitch)
Pitch setting
Reference pitch (Hz) after adjustment
-8
438
-4
439
0
440
+4
441
+8
442
Pitch icon
Playing Back a CD
CD-2.e.book 41 ページ ２００５年２月２０日 日曜日 午後４時２８分