Assigning track numbers at specified intervals – Roland CD-2 User Manual
Page 56

56
Assigning Tracks Numbers While You Record (continued)
Other Recording Methods
When making a long recording such as a lecture, you can
automatically assign track numbers at fixed time intervals to
divide the recording into tracks. If you’ve assigned track
numbers, it will be easier to find a desired location in the
recording.
1
Press
until “Auto Marker” appears in
the display, and then press
.
• You can also select this item by turning [DATA].
The following screen appears.
2
Turn
to select “Time.”
Off:
Track numbers will be assigned at the
points where you press
while
recording.
Time:
During recording, track numbers will be
assigned at every specified time interval.
Level:
During recording, track numbers will be
assigned when the sound drops below a
specified level.
3
Press
.
You’re returned to the previous readout.
4
Press
until “Auto Marker Time” appears
in the display, and then press
.
• You can also select this item by turning [DATA].
The following screen appears.
5
Turn
to specify the time interval
at which track numbers are
to be assigned.
• You can specify a time interval of 5 min–15 min
(minutes).
6
Press
twice.
You’re returned to the previous readout.
Subsequently, when you begin recording, track
numbers will automatically be assigned at every time
interval you’ve specified in Step 3.
• To defeat this setting, choose “Off” in Step 2.
Assigning Track Numbers at Specified Intervals
CD-2.e.book 56 ページ 2005年2月20日 日曜日 午後4時28分