Roland CD-2 User Manual
Page 85
85
Reference
■
CD-Related Problems (continued)
■
CF Card-Related Problems
Problem
Cause and Action
See
Page
Can’t record (continued)
●
Could you be attempting to record an extremely short performance?
➔
You can’t record for less than four seconds.
●
Are you using a generic CD-R/RW disc?
➔
Use a CD-R/RW disc from a recommended manufacturer.
After recording, the CD
won’t play back on a
conventional CD player
●
Did you finalize the disc after recording?
➔
Execute the Finalize operation.
●
Is your CD player able to play back CD-R or CD-RW discs?
➔
If your CD player does not support CD-R or CD-RW discs, they may not play back
correctly.
—
SMF data written to a CD-
R/RW disc is not
recognized
●
Could the filename contain double-byte (e.g., Japanese) characters?
➔
Filenames containing double-byte (e.g., Japanese) characters will not be
recognized.
—
The disc tray will not open
●
Is the CD-2 powered up?
➔
Turn on the power of the CD-2.
If a power failure has occurred, you can use the emergency eject hole to open the
disc tray manually.
Problem
Cause and Action
See
Page
The CF card is not
detected
●
Could the CF card be of a capacity that is not supported?
➔
Check the capacity of the CF card, and use a card of a capacity supported by the
CD-2.
●
Is the CF card inserted all the way into the slot?
➔
Make sure that the card is oriented correctly, and that it is pushed all the way into
the slot.
●
Could you have turned off the power while recording, or could the CF card have
been subjected to strong impact?
➔
It is possible that the data has been damaged. Reformat the CF card.
The CF card won’t play
back
●
Could you have inserted a CF card on which nothing has been recorded?
➔
Insert a different CF card.
—
●
Could you be using Repeat playback?
➔
Press [1/ALL] enough times to turn off the Repeat icon (
/
).
●
Could you be using A-B Repeat playback?
➔
Press [A-B] to get the A-B Repeat icon (
) to disappear.
➔
Alternatively, press the CF card [Stop (
)] to stop playback. A-B Repeat playback
will be defeated.
●
Is the CF card [Play (
)] button blinking?
➔
If the button is blinking, the CF card is paused. Press [Play (
)] to defeat
pause.
Insufficient playback
volume
●
Could the CF card playback level be set to the minimum?
➔
Adjust CF Mix Level to raise the playback level.
Troubleshooting (continued)
CD-2.e.book 85 ページ ２００５年２月２０日 日曜日 午後４時２８分