Ricoh Aficio 3245C - Manual (Page 39)

Copying from the Bypass Tray
25
2
When Copying on the Back
Side of the Paper
Using the bypass tray, you can make
copies on the back of paper which has
already been copied on the other side.
Note
❒ Do not use paper that has already
been copied onto by other equipment.
❒ Copies made on the back side of
the paper should be originals with
very little image area, such as text
originals.
❒ If the paper is curled, straighten it
out, and then insert it. If the paper
is not straightened out, it can cause
paper jams.
- - - -Original and paper
orientations
Pay attention to the orientation of pa-
per and originals.
❖ ❖ ❖ ❖ Top to top
❖ ❖ ❖ ❖ Top to bottom
AAAA
Open the bypass tray, and then
adjust the guides to the paper size.
BBBB
Gently insert the copied paper
with the side you want to copy
face up until the beeper sounds.
CCCC
Press the
{{{{#}}}} key.
DDDD
Select the paper size.
EEEE
Select [Plain: Dup.Back] or [Thick:
Dup.Back]
.
FFFF
Press [OK] twice.
GGGG
Place the originals, and then press
the
{{{{Start}}}} key.
GCMRY03E
GCMRYO4E
JupiterC2_GB_Copy_F_FM.book Page 25 Friday, January 20, 2006 7:37 PM