Ricoh Aficio 3245C - Manual (Page 33)

19
2. Copying
Basic Procedure
Preparation
When User Code Authentication is
set, the screen for entering a user
code will be displayed. Enter your
user code using the number keys,
and then press the
{{{{#}}}} key. For
user codes, see "Authentication In-
formation", General Settings Guide.
When Basic Authentication, Win-
dows Authentication, or LDAP
Authentication is set, the authenti-
cation screen will be displayed.
Enter your login user name and
user password, and then press
[Login]
. See "When the Authentica-
tion Screen is Displayed", General
Settings Guide.
AAAA
Make sure " d d d d Ready" is shown
on the display.
If any other function is displayed,
press the
{{{{Copy}}}} key.
❖ ❖ ❖ ❖ Initial copy display
BBBB
Make sure no previous settings
remain.
Note
❒ When there are previous set-
tings remaining, press the {{{{Clear
Modes
}}}} key before entering your
settings.
CCCC
Place the originals.
Reference
p.13 “Placing Originals”
DDDD
Make the necessary settings.
EEEE
Enter the required number of cop-
ies using the number keys.
Note
❒ The maximum copy quantity
that can be set is 999.
FFFF
Press the
{{{{Start}}}} key.
Copying starts.
Note
❒ When placing originals on the
exposure glass, press the
{{{{#}}}}
key after all the originals are
scanned.
❒ Copies are delivered face down.
Important
❒ When Basic Authentication,
Windows Authentication, or
LDAP Authentication is set, al-
ways log off when you have fin-
ished using the machine to
prevent unauthorized users
from using the machine.
JupiterC2_GB_Copy_F_FM.book Page 19 Friday, January 20, 2006 7:37 PM