beautypg.com

Installation, Rigid pipe venting systems, Horizontal or vertical terminations – Regency P33-NG3 User Manual

Page 13: Alternate hori- zontal termi- nation caps

background image

Regency P33-3 Zero Clearance Direct Vent Gas Fireplace

Pipe Length

Vertical

Terminal

Storm Collar

Flashing

Ceiling Firestop

24" (610mm)

Pipe Length

Adj.Pipe Length

11" - 14-5/8"

(279mm - 372mm)

90 Elbow

o

Horizontal

Termination

Cap

Wall Thimble

Vinyl Siding

Standoff (Optional)

Rigid Pipe Adaptor

45 Elbow

o

Adj.Pipe Length

11" - 14-5/8"

(279mm - 372mm)

Horizontal

Termination Cap

Wall Thimble

Vinyl Siding

Standoff (Optional)

INSTALLATION

RIGID PIPE VENTING SYSTEMS

Horizontal or Vertical Terminations

The minimum components required for a basic
horizontal termination are:

1 AstroCap Horizontal Termination Cap
1 45

o

Elbow

1 Rigid

Pipe

Adaptor

1 Wall

Thimble

1 Length of pipe to suit wall thickness
(see

chart)

For siding other than vinyl furring strips may be
used, instead of the vinyl siding standoff, to create
a level surface to mount the vent terminal. The
Terminal must not be recessed into siding.

If a Vinyl Siding Standoff is required (it must be
used with vinyl siding), measure to outside surface
of wall without siding and add 2 inches.

Flat Wall Installation

Max. Wall Vent Length
Thickness (inches) Required (inches)

7-1/4"

6"

10-1/4"

9"

13-1/4"

12"

12-1/4"

-

15-7/8" 11" - 14-5/8" Adj. Pipe

18-1/4"

-

25-1/4"

11" - 14-5/8" Adj. Pipe

Alternate Hori-

zontal Termi-

nation Caps

This product has been evaluated by Intertek for
using a Dura-Vent Flue Adaptor in conjunction
with Selkirk Direct-Temp and Ameri Vent Direct
venting systems. Use of these systems with the
Direct Vent GS starting collar is deemed accept-
able and does not affect the Intertek WHI listing
of components.

WARNING:

Do not combine venting components from
different venting systems.

However use of the the AstroCap

TM

and FPI

Riser is acceptable with all systems.

When using piping other than Simpson

Dura-Vent, 3 screws must be used to

secure rigid pipe to adaptor.

The FPI AstroCap

TM

and FPI Riser Vent terminal is certifi ed for installations using FPI venting systems as well as Simpson Dura-Vent®, Direct Vent GS,

American Metal Products, Ameri Vent Direct vent and Selkirk Direct-Temp. FPI

TM

, and FPI AstroCap

TM

are the proprietary trademarks of FPI Fireplace

Products International Ltd. Dura-Vent® and Direct Vent GS are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.

This manual is related to the following products: