RCA Scenium PHD50400 - Manual (Page 30)

Chapter 2 29
The Menu System
Adjusting the Monitor in RGB3 Input Mode
If the picture is not stable in RGB3 mode, use the RGB3 ADJUST feature to
adjust it.
1. From the main menu, highlight and select OPTIONS. The OPTIONS menu is
displayed.
2. Highlight the RGB3 ADJUST option.
3. Use the button to select the desired adjustment (1, 2 or 3). The choices
scroll as follows:
4. When the desired number is selected, press the button to return to the
FUNCTION menu items. You can continue making adjustments within the
FUNCTION menu, press GO BACK to return to the previous menu or press
MENU or CLEAR to exit the menu system.
Note: When AUTO PICTURE is on, switch it off and back on again to return the display
position to its original position.
Setting the SCREEN SAVER
The SCREEN SAVER option contains three features in one. These features are
used principally for PC operation.
The PLE (Peak Luminance Enhancement) function sets the luminance level to a
fixed mode to reduce the effects of phosphor aging.
The ORBITER moves the image around the screen intermittently to reduce the
effects of phosphor aging.
The INVERSE function works in RGB mode only. INVERSE inverts the video
signal, playing the image in a negative format.
Setting the PLE
PLE has two options:
AUTO – luminance level (contrast) is normal.
LOCK – dims picture to reduce phosphor aging.
The factory setting is AUTO. Setting the PLE option to LOCK dims the picture –
the contrast will be lower than normal.
To set the PLE level to LOCK:
1. From the main menu, highlight and select FUNCTION. The FUNCTION menu
is displayed.
2. Highlight the PLE option.
3. Use the button to select LOCK.
4. Press the button to return to the FUNCTION menu options. You can
continue making adjustments within the FUNCTION menu, return to the
previous menu or press MENU or CLEAR to exit the menu system.
: ON
: 1
: OFF
: 3
: ON
: 1
F U N C T I O N
SEL. ADJ.
DISPLAY
MENU ADJUST
POWER SAVER
GRAY LEVEL
FILM MODE
RGB3 ADJ.
SCREEN SAVER
RESET
RETURN
: ON
: 1
: OFF
: 3
: ON
: 1
F U N C T I O N
SEL. ADJ.
DISPLAY
MENU ADJUST
POWER SAVER
GRAY LEVEL
FILM MODE
RGB3 ADJ.
SCREEN SAVER
RESET
RETURN
This is the FUNCTION menu with the SCREEN SAVER
option highlighted.
Setting PLE to LOCK is recommended if
you are displaying stationary pictures.
This is the FUNCTION menu with the RGB3 ADJ. option
highlighted.