RCA Scenium PHD50400 - Manual (Page 26)

Chapter 2 25
The Menu System
To change the viewing size:
1. Press the CINEMA button on the remote control.
2. The current viewing size will be displayed. Press the CINEMA button again to switch to the next size. The
size switches as follows:
*Note: When viewing with an HD receiver, use the receiver’s screen format selections to set the proper ratio.
The AUTO PICTURE option only appears if you have a
computer connected.
: OFF
S C R E E N
SEL. ADJ.
MODE
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE
FINE PICTURE
PICTURE ADJ.
: FULL
RETURN
S C R E E N
SEL. ADJ.
MODE
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
: NORMAL
RETURN
The SCREEN menu with the MODE option highlighted.
Adjusting the Picture Position and Size
The SCREEN menu lets you adjust the position and size of the picture.
The first two options, V-POSITION and H-POSITION, adjust the placement of the
picture on the screen. For example, if the picture is too far to the left, you can use
the H-POSITION to move it to the right. To adjust the position of the picture on
the screen:
1. From the main menu, highlight and select the SCREEN option. The SCREEN
menu is displayed.
2. Use the s and t buttons to select the mode you want to change.
3. When the desired mode is highlighted, press the button. The selected mode
screen will be displayed.
Use the arrow buttons to adjust the position of the picture.
NOTE: If you don’t push the an arrow button within 5 seconds, the current setting is accepted
and the previous screen reappears.
4. When you’ve adjusted to the desired setting, press the GO BACK button on the
remote to return to the SCREEN menu.
The V-HEIGHT and H-WIDTH options expand and contract the size of the
picture to fill the screen. For example, if the picture is slightly wider than the
screen, you can use the H-WIDTH option to shrink the picture horizontally.
Note: These options are not available in STADIUM mode.
To adjust the screen size:
1. Select the desired option from the screen menu and press the button. The
selected mode window will be displayed.
2. Use the arrow buttons to adjust the size of the picture.
NOTE: If you don’t push an arrow button within 5 seconds, the current setting
is accepted and the previous screen reappears.
3. When you’ve adjusted to the desired setting, press OK to select and return to
the SCREEN menu.
Auto Picture
The AUTO PICTURE function appears in the SCREEN menu only if you have a computer connected to the monitor. When this feature is
turned on, it automatically adjusts flickering and striped patterns in a computer image. If you want to adjust these manually:
1. Select the AUTO PICTURE option from the SCREEN menu. Press the button to turn AUTO PICTURE off. When AUTO PICTURE is
turned off, the FINE PICTURE and PICTURE ADJ. options are displayed beneath it.
2. Select an option and press the button. The screen for that option will be displayed. Use the and buttons to adjust that
option. Press OK to return to the SCREEN menu.