RCA Scenium PHD50400 - Manual (Page 23)

The Menu System
22 Chapter 2
NOISE REDUCE : HIGH
: MEMORY
: WARM
: HIGH
P I C T U R E Q U A L I T Y
SEL. ADJ.
CONTRAST
BLACK LEVEL
SHARPNESS
COLOR
TINT
PRESETS
COLOR TEMP.
NOISE REDUCE
R G
RETURN
This is the PICTURE QUALITY menu with the NOISE REDUCE
(noise reduction) option highlighted.
This is the NOISE REDUCE (noise reduction) screen.
Reducing Noise in the Picture
Noise is a term used to describe extraneous bits of information in the signal that affect the clearness of the picture. You can use the
Noise Reduction (NOISE REDUCE) setting if your reception is poor or when playing video tapes that have poor picture quality.
The NOISE REDUCE option has four settings, including OFF. The higher the setting, the stronger the effect. The settings switch as
follows when the button is pressed:
To change the noise reduction setting:
1. From the PICTURE QUALITY menu, highlight the NOISE REDUCE option, and
select it by pressing the button. The NOISE REDUCE SCREEN is displayed.
2. Use the and buttons to select the desired noise reduction setting.
NOTE: If you don’t push the or button within 5 seconds, the current setting is
accepted and the previous screen reappears.
3. When the desired setting is displayed, press OK to return to the PICTURE
QUALITY menu. You can continue adjusting picture settings, return to the
main menu, or press CLEAR to exit the menu system.