Ricoh Printer/Scanner - Manual (Page 40)

Troubleshooting
34
5
Collate: Page max. The maximum number of pag-
es has been exceeded for colla-
tion. Turn the main power switch
off, wait a few seconds, and
then turn it back on. Reduce
the number of pages to be
printed, or, increase memory
capacity.
To install a memory module in
the machine, contact your
sales or service representative.
Duplex cancelled. Duplex printing has been can-
celed. Check the paper used is suita-
ble for duplex printing, or, in-
crease memory capacity. To
install a memory module in
the machine, contact your
sales or service representative.
Duplex mode is in off posi-
tion for Tray # The selected paper tray has
not been configured for du-
plex printing.
# indicates the tray number.
Press [JobReset] to change the
paper tray settings or do sin-
gle-sided printing.
For details about tray settings,
see General Settings Guide.
Ethernet Board Error An error has occurred in the
Ethernet interface. Turn the main power switch
off, wait a few seconds, and
then turn it back on. If the
message appears again, con-
tact your sales or service rep-
resentative.
Exceeded max. print size.
Press FormFeed/JobReset.
The page images to be printed
exceed the maximum print ar-
ea. Press [JobReset] to change the
paper tray settings, or press
[FormFeed]
to print regardless.
I/O buffer overflow The maximum size of the I/O
buffer has been exceeded. Increase the size of the I/O
buffer through the Host Inter-
face menu.
Load paper in Tray # There is no paper in the select-
ed paper tray.
# indicates the tray number.
Load the tray with paper.
NV-RAM Error An error has occurred in the
printer. Turn the main power switch
off, wait a few seconds, and
then turn it back on. If the
message appears again, con-
tact your sales or service rep-
resentative.
Output Tray changed. The output tray has been
changed due to the paper size
limitation of the selected tray. Select the correct output tray.
Messages/Second messages Causes Solutions