Radio Shack 43-142 - Manual (Page 81)

1
Beyond the Basics
On the handset, press and hold and # at the same time for
more than five seconds.
You will hear a confirmation tone. The handset will clear its
registration information from the base, and then delete its
own base information.
On the base you want to use, disconnect the AC adapter.
While holding FLASH/FIND HANDSET, connect the AC
adapter. Keep pressing FLASH/FIND HANDSET until the
CHARGE/IN USE indicator starts to blink.
Place the handset on the base and wait until the CHARGE/IN
USE indicator stops flashing.
This erases all the handset registration data on the base, not
limited to the handset you placed at Step 4 above. You need to
register other handset(s) also if you have more than one. First
de-register the handset as in Step 1 above, and then place it on
the base.
If you have trouble with de-registration, take your base and
handset (including accessory handset(s) if you have) to your
local
RadioShack store or call 1-800-The Shack (843-7422) for
assistance.
Also, when you request repair or service, please be sure to bring
in the entire system (including accessory handset if used) so we
can keep your registration data intact.
1.
2.
3.
4.