Radio Shack 43-142 - Manual (Page 46)

Beyond the Basics
To add (or delete) a “1” at the beginning of the displayed
phone number, press /TONE/<. To add (or remove) the
stored area code, press #/>.
Press the DIAL soft key to dial the number.
Deleting Caller ID Numbers
To delete only one Caller ID number, go to the Caller ID list and
select the number you want to delete. Press the DELETE soft key.
When the phone asks you to confirm, select YES.
To delete all the Caller ID numbers, go to the Caller ID list and
press the DELETE soft key. Select YES when asked if you want to
DELETE ALL.
NOTE
When you delete a Caller ID number, you delete it
permanently.
Using Call Waiting and Call Waiting
Deluxe
If you have Call Waiting service and a second call comes in when
you are on the phone, a call waiting tone will sound. Press
/FLASH on the handset or FLASH/FIND HANDSET on the base to
accept the waiting call. There is a short pause, and then you will
hear the new caller. To return to the original caller, press /FLASH
on the handset or FLASH/FIND HANDSET on the base.
NOTE
You must subscribe through your telephone
provider to receive Call Waiting services.
Your phone gives you new options for Call Waiting Deluxe. At the
touch of a button, you can place the caller on hold, send them
to your voice mail service, or conference them into your current
call. You must subscribe to Call Waiting and Call Waiting Deluxe
to use these features. Not all features are available in all areas.
Check with your telephone provider for details.
4.
5.