Radio Shack 43-142 - Manual (Page 34)

Beyond the Basics
Enter the number for this entry.
Once you have stored a name, STORE/EDIT NO. appears next.
Use the number keypad, #/>, /TONE/<, or the DELETE
soft key to enter the phone number ; the phone number
can contain up to 20 digits. If you need the phone to pause
between digits when it’s dialing (for example, to enter an
extension or an access code), press the PAUSE soft key to
insert a two-second pause. You will see a P in the display. You
can also use more than one pause together if two seconds is
not long enough. Each pause counts as one digit. Press the
OK soft key when you are finished.
Assign a distinctive ring tone for this entry (Distinctive Ring).
You can attach a personalized ring tone to each phonebook
entry; the phone will use this ring tone when this person
calls. Move the cursor to highlight one of the 20 different
ring tone options. As you highlight each ring tone, you will
hear a sample of that tone. When you hear the ring tone you
want to use, press the OK soft key. If you do not want to use
a distinctive ring tone for this phonebook entry, select the NO
SELECTN option, and the phone will use your standard ring
tone setting.
Assign this entry to a Speed Dial number (Speed Dial).
Your phone has 10 speed dial numbers, 0 to 9. Move the
cursor to select the speed dial number you want to assign to
this phonebook entry, and press the OK soft key. Select NO
SELECTN if you do not want to assign this entry to a speed
dial number. Press the OK soft key.
You will hear a tone confirming that the new phonebook entry
has been stored, and DONE! appears in the display.
NOTE
When the shared memory is full, the oldest Caller
ID message is overwritten.
4.
5.
6.
7.