Radio Shack 43-142 - Manual (Page 56)

Beyond the Basics
Press /FLASH, INT’COM/HOLD, or the ANSWER soft key
on the handset (or INT’COM/HOLD, , or the ANSWER soft
key on the base). Or press a number key, /TONE/<, or #/>
(when Any Key Answer is enabled), or pick up the handset
from the cradle (when AutoTalk is on).
To hang up an intercom page, press the END soft key or on
either handset (or INT’COM/HOLD on the base).
NOTES
If the party is busy, the handset returns to
standby.
If the party is out of range, UNAVAILABLE
appears in the display and the operation will be
canceled.
If you receive an outside or intercom call or page
while selecting the other handset, the operation
is canceled.
If you do not select a handset within 30 seconds,
the operation will be canceled.
If the party does not answer within one minute,
the operation is canceled. •
•
•
•
•
Room Monitor
This feature allows you to monitor sounds in another room. Place
a station in the room you wish to monitor; it will function as a
microphone. Another station can be set to function as a remote
speaker, allowing you to monitor sounds in the room.
Press the MENU soft key and enter ROOM MONITOR menu.
TO ROOM MONITOR appears.
Select the handset or base you want to monitor by using or
.
Press the OK soft key. ROOMMONITOR appears on the
handset, and you hear sounds in the room where the handset
or base is installed.
To turn off the Room Monitor, press the END soft key or on
either handset or return the handset to the cradle.
1.
2.
1.
2.
3.
4.