Radio Shack 43-142 - Manual (Page 51)

1
Beyond the Basics
Using Hold, Conference and
Transfer
Placing a Call on Hold
During a call, press INT’COM/HOLD on the station to place
the caller on hold. If you leave a caller on hold for more than
ten seconds, the display screen will read, LINE ON HOLD.
To return to the party on hold, press /FLASH or on a
handset or on the base. The phone will return to the
holding party.
NOTES
You can only place a caller on hold for 5 minutes.
Once 5 minutes has passed, that party’s line will
be disconnected and the phone will return to
standby.
While a call is on hold, Caller ID and Call Waiting
cannot be received. •
•
Conferencing
If you have more than one handset, up to four people can
participate in a conference call. A four-way conference call
consists of an outside line, two handsets, and the base
speakerphone. You can easily join a call already in progress.
Press /FLASH or on the handset or on the base to join
the call.
To hang up, return the handset to the cradle or press on
the handset or on the base. The other party will still be
connected to the call.
1.
2.
1.
2.