Radio Shack 43-3871 - Manual (Page 64)

The Integrated Answering D
e
vice
64
Remote access with the handset
You can operate your answering system
from another room using a handset.
Ô
1. When the phone is in the standby
mode, press SELECT/ on the
handset. Remote Answering
Machine operation appears on the
handset display. The answering system
announces the current time and the
number of messages stored in the
memory.
Messages will be played in the order in
which they were received. The time and
day that each message was received is
announced after the message is
played.
2. You hear “To play incoming messages,
press two. For help, press zero”.
You will hear a beep.
3. Enter a command within 30 seconds.
You may select a command from the
following chart:
Ô
NOTES
Ô
• If you press END before
the answering system
answers, the phone will
return to standby.
• When the answering
system does not answer
within 6 seconds, you
hear a beep and the
phone will return to
standby.
• The base’s keypad is
disabled during remote
operation.
• When you receive a call,
the remote operation is
canceled.
• You can change the
handset volume during a
remote operation.
• During the remote
operation
-- appears on
the base.
• If you have new
messages and old
messages, only the new
messages will be played.
After you have reviewed
your new messages, you
can play your old
messages by again
pressing
X/2 .