Radio Shack 43-3871 - Manual (Page 48)

The Integrated Answering D
e
vice
48
4. To speak to the caller, press
TALK/FLASH (or SPEAKER on the base)
on the receiving handset.
From the base to a handset
1. During a call, press INTCM/PAGE on the
base. The call will automatically be
placed on hold, and an intercom tone
sounds. All the handset(s) will be
paged.
2. On the receiving handset, to answer the
call, press TALK/FLASH or
HOLD/TRSF/INTCM . The intercom mode
is activated, but the caller is still on hold.
Or press any number key,
/tone/< or #/> (when Any Key Answer is
On), or pick up the handset from the
cradle (when Auto Talk is on).
3. To speak to the caller, press
TALK/FLASH on the receiving handset.
R EPLACING THE B ASE
If the base unit is replaced with a different
base from this same series of cordless
models, you must clear the handset(s) and
base identification numbers. To do this,
select “System Reset” from handsets
display menu option list (see page 25 for
guidance).
THE INTEGRATED
ANSWERING DEVICE
The phone has a built-in answering system
that answers and records incoming calls.
You can also use your answering system to
record a conversation, leave a voice memo
message or to announce a special outgoing
message to callers when you’re away from
your phone.