Radio Shack 43-3871 - Manual (Page 16)

Setting Menu Options
16
Global Setup
If you change one of the Global settings, you change the setting for all
additional handsets. Only one handset can change Global settings at a
time.
System Reset
System Reset is used to clear the handset's ID from the main base unit,
or the base ID from the handset.
Submenu option Description
Day & time Set the day and time of your display (see page 23).
CIDCW
(Default is CW on/
CWDX off)
Set the Caller ID on Call Waiting (CIDCW) setting.
CIDCW performs the same as regular Caller ID on a call
waiting number (see page 23). Call Waiting Deluxe allows
you to handle call waiting calls in seven different ways
(see page 43).
Area Code
Store or edit the area code. If you enter a 3-digit area
code number in the “Area Code” option, your local area
code does not appear in the Caller ID message. For calls
received from outside your local area code, you will see a
full 10-digit number (see page 23). Note: If your calling
area requires 10-digit dialing, do not program this option.
Dial Mode
(Default is tone)
Set the dial mode to tone or pulse (see page 24). Most
phone systems use tone dialing, which sends DTMF tone
through phone line, the default setting is tone dialing.
Depends on your dialing system, set the dial mode.
Copy Phonebook
Allow you to transfer the phonebook data stored in one
handset to another handset (see page 24).
Submenu option Description
De-register HS
Clear the handset ID from the base. Use this option, for
example, when you change the digital security code (see
page 25).
Replacing Base
Clear the base ID. Use this option, for example, if you
wish to deregister the base to use the handset with 43-
3570 (see page 25).