Radio Shack 43-3871 - Manual (Page 10)

Installation
10
3. Plug one end of the supplied modular
cord (short for a wall plate, long for
direct wall mounting) into the
TEL LINE
jack on the base’s back.
4. Insert the supplied AC adapter's barrel
plug into the DC IN 9V jack.
5. Route the
adapter and
modular cords
through the
base’s grooves.
6. For a wall plate,
plug the modular
cord’s other end into the wall plate jack,
then align the base’s keyhole slots with
the wall plate studs and slide the base
downward to secure it.
For direct wall
mounting, align
the base’s
keyhole slots
with the
mounting
screws and
slide the base downward to secure it.
7. Plug the adapter into a standard AC
outlet.
8. Lift the base’s antenna to a vertical
position.
C ONNECTING /C HARGING THE
B ATTERY P ACK
The phone comes with a rechargeable
nickel-metal hydride (Ni-MH) battery pack in
the handset, but not connected. Before
using your phone, you must connect the
battery pack, then charge it for about 15–20
hours.