Radio Shack 43-3871 - Manual (Page 17)

Sett
ing Men
u Opt
ions
17
S
ETTING
U
P THE
M
ENU
Entering the Menu
1. Press MENU/DEL in standby mode.
2. Use VOL/RING/ or VOL/RING/ to
move the pointer to a desired main
menu (DirectLink Mode, Room Monitor,
Handset Setup, Answ. Setup, Global
Setup, and System Reset).
3. Press SELECT/ to select the desired
main menu.
4. Use VOL/RING/ or VOL/RING/ to
select a desired submenu and then
press
SELECT/ to enter.
In the submenu, use VOL/RING/ or
VOL/RING/ to select an item. Press
SELECT/ to confirm your selection.
For detailed instructions, see the
following sections for the desired
submenu.
5. To exit the menu, press END or place
the handset to the cradle.
DirectLink Mode
Using the DirectLink Mode
1. Enter the DirectLink Mode menu (see
“Entering the Menu” on page 17).
To enter DirectLink mode
press [SELECT]
appears.
2. Press SELECT/ to enter the
DirectLink mode. You will hear a
confirmation tone, and
DirectLink
Mode Complete appears.
3. To return back to the normal mode, exit
the DirectLink mode. To exit the
DirectLink mode, press
MENU/DEL , and
then SELECT/ , or return the handset
to the cradle.