Radio Shack 43-3871 - Manual (Page 57)

T
he Integrated Answering D
evice
57
Setting the call screen
You can screen calls when the Call Screen
function is set to On.
Ô
1. Press CLOCK/MENU seven times.
The current Call Screen setting (On or
Off) appears on the base and it is
announced.
2. Press SKIP/SELECT or
REPEAT/SELECT to choose or .
3. Press SET . A confirmation tone sounds,
and the system announces the new
setting.
Screening a call
From the base
To screen an incoming call, do the steps as
follows:
1. After the answering system answers,
the base speaker will let you hear the
calls as the machine records the
message. To adjust the volume, press
VOL/RING/ or VOL/RING/ . If you set
the answering system to Off, you
cannot screen a call.
To mute the call screen temporarily,
press
XPLAY/ STOP when the system
is answering.
2. To answer the call, press SPEAKER or
pick up the handset from the base
(when AutoTalk is set to On). If the
handset is away from the base, press
TALK/FLASH , SPEAKER or any number
key, /tone/< or #/> (when Any Key
Answer is set to On). The answering
system will disconnect automatically.
Ô
NOTES
Ô
• If you mute the ringer,
you can not screen the
call.
• If you press TALK/
FLASH , call screen will
be canceled and the
handset is put in talk
mode.