Radio Shack 43-3871 - Manual (Page 23)

Sett
ing Men
u Opt
ions
23
Global Setup
When a Global setting is changed from one
handset, this affects all registered handsets.
Setting Day and Time
1. Enter the Global Setup menu, and then
the Day & Time submenu (see
“Entering the Menu” on page 17).
Ô
2. Press VOL/RING/ or VOL/RING/ to
select the day of the week, and then
press
SELECT/ .
3. Press VOL/RING/ or VOL/RING/ to
set hour, and then press SELECT/ .
4. Press VOL/RING/ or VOL/RING/ to
set minute and then press SELECT/ .
5. Press VOL/RING/ or VOL/RING/ to
choose AM or PM and then press SELECT/
. You will hear a confirmation tone.
Setting CIDCW (Caller ID on Call Waiting)
1. Enter the Global Setup menu, and then
the CIDCW submenu (see “Entering
the Menu” on page 17).
2. Press VOL/RING/ or VOL/RING/ to
select CW On / CWDX On ,
CW On / CWDX Off , or CW Off / CWDX Off
and then press SELECT/ . You will
hear a confirmation tone.
Setting the Area Code
When the area code has already been
stored in memory, the stored area code will
be displayed. To change it, use
MENU/DEL
and number keys to enter the new area
code.
1. Enter the Global Setup menu, and then
the Area Code submenu (see “Entering
the Menu” on page 17).
Ô
NOTES
Ô
• You can set the clock
either by the handset or
base (see “Setting the
Time” on page 52).
• For setting the day and
time, the idle time-out is
extended to 2 minutes.