Radio Shack 43-3871 - Manual (Page 18)

Setting Menu Options
18
Room Monitor
Using Room Monitor
1. Enter the Room Monitor menu (see
“Entering the Menu” on page 17).
To Room Monitor appears.
2. Select the handset or base you want to
monitor by using VOL/RING/ or
VOL/RING/ .
When monitoring the other handset, be
sure the other handset is facing up so
the microphone can pick up the sound
clearly.
3. Press SELECT/ .
RoomMonitor appears and you hear
sounds in the room where the handset
is installed.
Handset speaker is on the rear side.
Place the handset so the speaker is not
covered.
4. To finish the Room Monitor, press END
or return the handset to the cradle.
Handset Setup
Selecting a Ringer Tone
1. Enter the Handset Setup menu, and
then the Ringer Tones submenu (see
“Entering the Menu” on page 17).
There are 10 ringer tones or 10
melodies to choose from.
• Ringers [Flicker, Clatter, Soft Alert,
Wake Up, Light Bug, Beep Boop,
Tone Board, Chip Chop, Party Clap,
Reminder]