Radio Shack 43-3871 - Manual (Page 27)

Making and
Receivin
g Calls
27
From the Base (Receiving calls
only)
1. Press SPEAKER and begin speaking. Ô
2. To hang up, press SPEAKER .
P
LACING A
C
ALL ON
H
OLD
1. During a call, press HOLD/TRSF/INTCM
or HOLD on the base. The call will be
put on hold.
Ô
2. To talk to the caller, press TALK/FLASH
or SPEAKER on a handset (or SPEAKER
on the base). The phone will return
back to the call.
R EDIALING A C ALL
The last three phone numbers dialed can be
quickly redialed.
Ô
Redialing from Standby Mode
1. Press REDIAL/PAUSE in standby mode.
2. Press REDIAL/PAUSE again. Each
press of REDIAL/PAUSE will display one
of the last three number redialed.
Ô
3. Press TALK/FLASH or SPEAKER . The
selected number is dialed.
4. To hang up, press END .
To hang
up Press END or return the handset to
the cradle (Auto Standby).
To enter a
pause
within the
dialing
sequence When you dial the number in standby
mode, press REDIAL/PAUSE.
P
appears in the display, which
represents a pause.
From the Handset
Normal
conversation
Hands-free
conversation
Ô
NOTES
Ô
Making and Receiving
Calls
•
The base microphone is
located under the base.
Position yourself as near
to the base as possible.
Placing a Call on Hold
•
You can hold a call for 5
minutes, when 5 minutes
has passed, the call is
disconnected and the
phone returns to standby
mode.
• While a call is on hold,
CIDCW can not be
received.
• For the handset, after 10
seconds of pressing
HOLD/TRSF/INTCM or
by pressing the END
key, the handset display
screen will read,
Line On Hold
.
Redialing a Call
•
If the number exceeds
32 digits, only the first 32
digits are retained in
redial memory.
• If the redial memory is
empty, you will hear a
beep.