Rinnai RHFE-308 FTR - Manual (Page 24)

– 24 –
LOCATION
When positioning the heater the main points
governing the location are:
1. Flueing
2. Warm air distribution
This heater must not be installed where curtains or
other combustible materials could come into
contact with it.
In some cases curtains may need restraining.
See diagram for other recommended clearances.
Flue fittings must be kept clear of flammable
materials.
This heater is not designed to be built in.
The flue is not designed to be positioned under
floors, or below the level of the heater.
The flue terminal should be positioned away from
flammable materials.
300
1000
50
50
Flue
Terminal
Flue
Terminal
Flue Terminal
LP GAS
(mm)