Nortel Networks S4000 - Manual (Page 56)

44
Bas
ic Ph
otography an
d Pl
ayba
ck
: A
(Auto)
M
o
de
Taking Pictures with the Self-timer
The camera is equipped with a ten-second and two-second timer for self-portraits.
This feature is useful for reducing the effects of camera shake that occurs when
pressing the shutter-release button. When using the self-timer, use of a tripod is
recommended.
1
Tap the self-timer control.
The self-timer menu is displayed.
2
Tap 10
s or 2s.
10
s (ten seconds): Use on important occasions, such as
weddings
2
s (two seconds): Use to prevent camera shake
The selected self-timer mode is displayed.
Tap H to close the menu and return to shooting mode
without changing the self-timer setting.
3
Frame the picture and press the
shutter-release button halfway.
Focus and exposure will be set.
4
Press the shutter-release button the
rest of the way down.
The self-timer starts, and the number of
seconds remaining before the shutter is
released is displayed in the monitor. The self-
timer lamp blinks while the timer is counting
down. About one second before the shutter is
released, the lamp stops blinking and glows
steadily.
When the shutter is released, the self-timer will
be set to
OFF.
To stop the timer before a picture is taken, press
the shutter-release button again.
11 11 11
Self-timer
11 1 250 250 250 F3.2 F3.2 F3.2
11 1 250 250 250 F3.2 F3.2 F3.2