Nortel Networks S4000 - Manual (Page 30)

18
First Ste
p
s
Charging the Battery
Charge the supplied Rechargeable Li-ion Battery EN-EL10 inserted into the
camera, by connecting the supplied Charging AC Adapter EH-68P to the camera
via the supplied USB Cable UC-E6, and then plugging the Charging AC Adapter
into an electrical outlet.
1
Prepare the Charging AC Adapter EH-68P.
If a plug adapter* is included, attach the plug adapter to the plug
on the Charging AC Adapter. Push the plug adapter firmly until it is
securely held in place. Once the two are connected, attempting to
forcibly remove the plug adapter could damage the product.
* The shape of the plug adapter varies according to the country or
region in which the camera was purchased.
For Customers in Argentina
If the camera was purchased in Argentina, the shape of the
Charging AC Adapter EH-68P (AR) differs from that supplied in
other countries, and a plug adapter is not included. Proceed to step
2.
2
Be sure that the power-on lamp and the monitor are off.
Be sure to insert the battery into the camera ( A 16) and turn off the camera (A 21).
3
Use the supplied USB cable to connect the Charging AC Adapter to the
camera.
B
Connecting the Cable
When connecting the cable, be sure that the camera connector is properly oriented. Do not use
force when connecting the cable to the camera. When disconnecting the cable, do not pull the
connector at an angle.
EH-68P (AR)
USB cable