Nortel Networks S4000 - Manual (Page 42)

30
Bas
ic Ph
otography an
d Pl
ayba
ck
: A
(Auto)
M
o
de
Step 3 Focus and Shoot
1
Press the shutter-release button halfway.
Focus is locked when the shutter-release button is
pressed halfway.
When a face is recognized, it is framed by the double
border indicating the active focus area. When the subject
is in focus, the double border turns green.
When a face is not recognized, camera automatically
selects the focus area (up to nine areas) containing the
subject closest to the camera. When the subject is in
focus, the active focus area glows green.
When digital zoom is used, the focus area is not displayed
and the camera focuses at the center of the frame. Once
focus has been acquired, the focus indicator will glow
green.
When the shutter-release button is pressed halfway, the
shutter speed and aperture value are also displayed.
Focus and exposure remain locked while the shutter-release button is pressed halfway.
While the shutter-release button is pressed halfway, the focus area or focus indicator
may blink red. This indicates that the camera is unable to focus. Modify the composition
and press the shutter-release button halfway again.
2
Press the shutter-release button the rest of
the way down.
The shutter is released and the picture will be recorded to
the memory card or internal memory.
1 1 250 250 250 F3.2 F3.2 F3.2
Shutter speed
Aperture
11 1 250 250 250 F3.2 F3.2 F3.2
Shutter speed
Aperture
1 125 F5.9
Focus indicator