NetComm HS1100 - Manual (Page 57)

HS1100 Wireless Hotspot Gateway User Manual
56
Authentication Method – LDAP
Choose “LDAP” from the Authentication Method field, the hyperlink beside the pull-down menu will become
“LDAP Setting”.
Click the hyperlink of LDAP Setting for further configuration. Enter the information for the primary server and/or the
secondary server (the secondary server is not required). The blanks with red asterisk are necessary information
which should be filled in. These settings will become effective immediately after clicking the Apply button.
y Server IP: Enter the IP address or domain name of the LDAP server.
y Port: Enter the Port for the LDAP server, and the default value is 389.
y Base DN: Enter the distinguished name for the LDAP server.
y Account Attribute: Enter the account attribute of the LDAP server.