NetComm HS1100 User Manual

Page 197

HS1100 Wireless Hotspot Gateway User Manual

196

4) Using DHCP: If you want to use DHCP, choose

“Obtain an IP address automatically” and click

OK. This is also the default setting of Windows.

Then, reboot the PC to make sure an IP address

is obtained from HS1100.

5) Using Specific IP Address: If you want to use a

specific IP address, acquire the following

information from the network administrator: the IP

Address, Subnet Mask and DNS Server address

provided by your ISP and the Gateway address of

HS1100.

If your PC has been set up completely, please inform the network administrator before proceeding to the

following steps.

5.1) Choose “Use the following IP address” and

enter the IP address, Subnet mask. If the DNS

Server field is empty, select “Using the

following DNS server addresses” and enter

the DNS Server address. Then, click OK.

5.2) Click Advanced to enter the Advanced

TCP/IP Settings window.