NetComm HS1100 - Manual (Page 195)

HS1100 Wireless Hotspot Gateway User Manual
194
5) Using Specific IP Address: If you want to use a specific IP address, acquire the following information
from the network administrator: the IP Address, Subnet Mask and DNS Server address provided by your
ISP and the Gateway address of HS1100.
If your PC has been set up completely, please inform the network administrator before proceeding to the
following steps.
5.1) Choose “Use the following IP address” and
enter the IP address, Subnet mask. If the DNS
Server field is empty, select “Using the
following DNS server addresses” and enter
the DNS Server address. Then, click OK.
5.2) Click Advanced to enter the Advanced
TCP/IP Settings window.
5.3) Click on the IP Settings tab and click Add
below the “Default gateways” column and the
TCP/IP Gateway Address window will appear.
5.4) Enter the gateway address of HS1100 in the
“Gateway” field, and then click Add. After
back to the IP Settings tab, click OK to
complete the configuration.