NetComm HS1100 User Manual
Page 144
HS1100 Wireless Hotspot Gateway User Manual
143
Some major fields are required:
Setting Description
Merchant Login ID
This is the “Login ID” that comes with the Authorize.Net account.
Merchant Transaction Key
To get a new key, please log in Authorize.Net >> Click Settings and Profile >>
Go to the “Security” section >> Click Obtain Transaction Key >> Enter
“Secret Answer” >> Click Submit.
Payment Gateway URL
https://secure.authorize.net/gateway/transact.dll (default gateway address)
MD5 Hash
To enhance the transaction security, merchant owner can choose to enable this
function and enter a value in the text box: “MD5 Hash Value”.
Note:
For detailed description, please see 4.2.1.6 Authentication Method >> On-demand User >>
Payment
1.3 Configure the Authorize.Net Merchant Account to Match the Configuration of HS1100
Settings of the merchant account on Authorize.Net should be matched with the configuration of HS1100:
Setting Description
MD5 Hash
To configure “MD5 Hash Value”, please log in Authorize.Net >> Click Settings
and Profile >> Go to the “Security” section >> Click MD5 Hash >> Enter
“New Hash Value” & “Confirm Hash Value” >> Click Submit.
Required Card Code
If the “Card Code” is set up as a required field, please log in Authorize.Net >>
Click Settings and Profile >> Go to the “Security” section >> Click
>> Check the Does NOT Match (N) box >> Click Submit.
Required Address Fields
After setting up the required address fields on the “Credit Card Payment Page
Billing Configuration” section of HS1100, the same requirements must be set
on Authorize.Net. To do so, please log in Authorize.Net >> Click Settings and
Profile >> Go to the “Security” section >> Clic
>> Check the boxes accordingly >> Click Submit.
1.4 Test The Credit Card Payment via Authorize.Net
To test the connection between HS1100 and Authorize.Net, please log in HS1100. >> User Authentication >>
Authentication Configuration >> Click the server On-demand User >> On-demand User Server Configuration
>> Payment >> Payment Configuration >> Select Authorize.Net >> Go to “Authorize.Net Payment Page
Configuration” section >> Enable the “Test Mode” >> Click Try Test and follow the instructions