NetComm HS1100 User Manual
Page 17
HS1100 Wireless Hotspot Gateway User Manual
16
y Step 6. Set Wireless – Access Point Connection
¾
Band: HS1100 supports two transmission modes,
Disabled, 802.11b, 802.11g and 802.11 (b+g).
Select the appropriate transmission mode to work
with the wireless clients in the network.
¾
Channel: If the default channel has been used by
many other access points, it is necessary to
select another channel from the drop-down list
box for a better performance.
¾
ESSID: Enter a SSID (up to 32 characters) for
the system. The default is HS1100. ESSID is a
unique identifier used for the wireless users’
devices to associate with HS1100.
Click Next to continue.
Note:
Available channels depend upon the region you are located. For instance, Channel 1~11
is available in North America, and Channel 1-13 in Europe.
y Step 7. Save and Restart HS1100
Click Restart to save current settings and restart
HS1100. The Setup Wizard is now completed.
y Setup Wizard. During HS1100 restart, a “Restarting now.
Please wait for a while.” message will appear on the
screen. Please do not interrupt HS1100 restarting process
until the message has disappeared. This indicates
that the entire restart process has been completed
successfully.