NetComm HS1100 - Manual (Page 191)

HS1100 Wireless Hotspot Gateway User Manual
190
y TCP/IP Network Setup
If the operating system of the PC in use is Windows 95/98/ME/2000/XP, keep the default settings without any
changes to directly start/restart the system. With the factory default settings, during the process of starting the
system, HS1100 with DHCP function will automatically assign an appropriate IP address and related information
for each PC. If the Windows operating system is not a server version, the default settings of the TCP/IP will
regard the PC as a DHCP client, and this function is called “Obtain an IP address automatically”.
If checking the TCP/IP setup or using the static IP in the LAN1/LAN2 or LAN3/LAN4 section is desired, please
follow these steps:
‹ Check the TCP/IP Setup of Window 9x/ME
1) Choose Start >> Control Panel >> Network.
2) Click on the Configuration tab and select
“TCP/IP > AMD PCNET Family Ethernet
Adapter (PCI-ISA)”, and then click Properties.
Now, you can choose to use DHCP or a specific
IP address.