NetComm HS1100 - Manual (Page 192)

HS1100 Wireless Hotspot Gateway User Manual
191
3) Using DHCP: If you want to use DHCP, click on
the IP Address tab and choose “Obtain an IP
address automatically”, and then click OK. This
is also the default setting of Windows. Then,
reboot the PC to make sure an IP address is
obtained from HS1100.
4) Using Specific IP Address: If you want to use a specific IP address, acquire the following information
from the network administrator: the IP Address, Subnet Mask and DNS Server address provided by your
ISP and the Gateway address of HS1100.
If your PC has been set up completely, please inform the network administrator before proceeding to the
following steps.
4.1) Click on the IP Address tab and choose
“Specify an IP address”. Enter the IP
Address, Subnet Mask and then click OK.