Nokia 3200 - Manual (Page 47)

M e n u f u n c t i o n s
36 Copyright © 2004 Nokia. All rights reserved.
Select the desired enhancement, for
example
Headset or Handsfree .
Depending on the enhancement, you
can select some of the following
functions:
• Default profile to select the profile
that is automatically activated
when you connect the selected
enhancement to the phone.
• Automatic answer to set the phone
to automatically answer an
incoming call after five seconds. If
the
Incoming call alert is set to
Beep once or Off , automatic answer
cannot be used.
• Lights to set the lights permanently
on ( On ) or to remain on for 15
seconds after a keypress
(
Automatic ).
• Ignition detector and On to set the
phone to automatically switch off
about 20 seconds after the car’s
ignition is turned off. This function
is shown if the phone is or has been
connected to the full car kit.
• Use text phone and Yes to use the
text phone settings instead of
headset or loopset settings with a
text phone.
Enhancement indicators in
standby mode
When a compatible enhancement is
connected to the phone, the
corresponding indicator (for example
or ) is shown in standby mode.
Security settings
To access this menu: Press Menu in
standby mode, and select Settings and
Security settings .
Note: When security features
that restrict calls are in use
(call barring, closed user
group and fixed dialling), calls
may be possible to certain
emergency numbers in some
networks (e.g. 112, 911 or
other official emergency
numbers).
Select
• PIN code request to set the phone
to ask for your PIN code every time
the phone is switched on. Some
SIM cards do not allow this setting
to be changed.
• Call barring service to restrict the
calls that can be made or received
with the phone (network service).
• Fixed dialling to restrict calls and
text messages from your phone to
selected phone numbers, if allowed
by your SIM card (network service).
When the fixed dialling is on,
(E)GPRS connections can only be
used for sending text messages.
The recipient’s phone number and
the message centre number have to
be included on the fixed dialling
list.