Nikon D300s - Manual (Page 60)

34
s
Format the Memory Card
Memory cards must be formatted before first use or after being
used or formatted in other devices.
1
Turn the camera on.
2
Press the Q buttons.
Hold the Q (I and O)
buttons down simultaneously
until a blinking
C appears
in the shutter-speed displays
in the control panel and
viewfinder. If two memory
cards are inserted, the primary
card slot (
0 72) will be
selected; you can choose the
secondary slot by rotating the
main command dial. To exit
without formatting the
memory card, wait until
C stops blinking (about six
seconds) or press any button other than the Q (I and O)
buttons.
3
Press the Q buttons again.
Press the Q (I and O) buttons together a second time
while C is blinking to format the memory card.
Do not
remove the memory card or remove or disconnect the power
source during formatting.
D Formatting Memory Cards
Formatting memory cards permanently deletes any data they may contain.
Be sure to copy any photographs and other data you wish to keep to a
computer before proceeding (
0 224).
O button I button