Nikon D300s - Manual (Page 331)

305
U
Acquire reference data for the Image Dust Off option in
Capture NX 2 (available separately; for more information, see the
Capture NX 2 manual).
Image Dust Off ref photo is available only when a CPU lens is
mounted on the camera. A lens with a focal length of at least
50 mm is recommended. When using a zoom lens, zoom all the
way in.
1
Choose a start option.
Highlight one of the following
options and press
J. To exit
without acquiring image dust
off data, press
G.
• Start: The message shown at
right will be displayed and “rEF” will
appear in the viewfinder and control
panel displays.
• Clean sensor and then start: Select this
option to clean the image sensor
before starting. The message shown at
right will be displayed and “rEF” will
appear in the viewfinder and control
panel displays when cleaning is
complete.
Image Dust Off Ref Photo
G
button ➜ B Setup menu
D Image Sensor Cleaning
Dust off reference data recorded before image sensor cleaning is
performed can not be used with photographs taken after image
sensor cleaning is performed. Select
Clean sensor and then start
only if the dust off reference data will not be used with existing
photographs.