Nikon D300s - Manual (Page 297)

271
U
This option controls whether the E button is needed to set
exposure compensation ( 0 118). If
On (Auto reset) or On is
selected, the 0 at the center of the exposure display will blink even
when exposure compensation is set to ±0.
b4: Easy Exposure Compensation
G
button ➜ A Custom Settings menu
Option Description
K On (Auto reset)
Exposure compensation is set by rotating one of the
command dials (see note below). The setting
selected using the command dial is reset when the
camera or exposure meters turn off (exposure
compensation settings selected using the
E button
are not reset).
On
As above, except that the exposure compensation
value selected using the command dial is not reset
when the camera or exposure meters turn off.
Off
Exposure compensation is set by pressing the E
button and rotating the main command dial.
A Change Main/Sub
The dial used to set exposure compensation when
On (Auto reset) or
On is selected for Custom Setting b4 (Easy exposure compensation)
depends on the option selected for Custom Setting f8 (
Customize
command dials) > Change main/sub (0 297).
Customize command dials > Change main/sub
Off On
Exposure
mode
e Sub-command dial Sub-command dial
f Sub-command dial Main command dial
g Main command dial Sub-command dial
h N/A