Nap 200-004 installation of peripheral equipment, Installation of external mdf, Nap 200-004 – NEC NEAX2000 IVS ND-45492 User Manual
Page 77: Installation of peripheral equipment, Figure 004-1, Location of the cable hole, Nap- 200-004
CHAPTER 3
ND-45492 (E)
Page 60
Revision 2.0
1. Installation of External MDF
•
Secure the external MDF onto the floor or mount the MDF onto the wall.
•
Mount the required MDF components.
•
If required, install the cable ducts for the cables to be laid between the MDF and the Main Equipment. In
this case, confirm the locations of the cable holes for the Main Equipment. Refer to
Figure 004-1 Location of the Cable Hole
NAP 200-004
Sheet 1/12
Installation of Peripheral Equipment
FRONT
430 mm (16.9 inch)
RACK PARTS
214 mm (8.4 inch)
184 mm (7.2 inch)
30 mm (1.2 inch)
CABLE HOLE