NETGEAR 802.11b Cable/DSL Wireless Router MR814 - Manual (Page 16)

Wireless Router Setup Manual
12 Getting to Know Your Wireless Router
v1.0, August 2007
On the left, click Setup Wizard to view the following screen.
If you cannot connect to the wireless router, verify your computer networking setup. It should
be set to obtain both IP and DNS server addresses automatically, which is usually the case. For
help with this, consult the documentation that came with your computer, or see the links
in
“Related Documents” .
5. Click Next. The wizard assists you with configuring your wireless router to access the
Internet.
Advanced users who want to manually configure the router can select the No radio button,
enter admin and password as the user name and password when prompted, and fill in the
required information on the Basic Settings page (for more information about basic settings,
refer to
“Product Registration, Support, and Documentation” on page 12 ).
6. Click Done to finish.
You are now connected to the Internet! The wireless router displays its home page.
If you do not click Logout, the wireless router waits 5 minutes after there is no activity before it
automatically logs you out.
Product Registration, Support, and Documentation
Register your product at http://www.NETGEAR.com/register . Registration is required before you
can use NETGEAR’s telephone support service. Product updates and Web support are always
available by going to:
http://www.NETGEAR.com/support .
Documentation is available on the CD, on the support website, and on the documentation website.
When the wireless router is connected to the Internet, click the Knowledge Base or the
Figure 12