NETGEAR 802.11b Cable/DSL Wireless Router MR814 User Manual

Page 13

Text mode
Original mode

Wireless Router Setup Manual

Getting to Know Your Wireless Router

v1.0, August 2007

g. Locate the cable you removed from the modem in

Step c

. Securely insert that cable (4)

into a LAN port on the router such as LAN port 1.

Your network cables are connected, and you are ready to start your network.

Start your network in the correct sequence.

First, plug in and turn on the cable or DSL modem. Wait 2 minutes.

b. Now, plug the power cord into your wireless router and into a power outlet. Wait 1 minute.

Last, turn on your computer.

Figure 8

Failure to start or restart your network in the correct sequence could prevent you
from accessing the Internet.

For DSL customers, if software logs you in to the Internet, do not run that
software. You might need to go to the Internet Explorer Tools menu, Internet
Options, then click the Connections tab where you can select Never dial a
connection.