Deleting a dialing translation table entry, Deleting a dialing translation table entry 66 – Nortel Networks NORSTAR VOICE MAIL 4.0 FAX P0886629 User Manual
Page 66
![background image](/manuals/193465/66/background.png)
66
Appendix B: Dialing Translation
FAX Set Up and Operation Guide
P0886629 Issue 1.0
Deleting a Dialing Translation Table entry
The System Coordinator can delete an entry in the Dialing Translation Table at any
time. To locate the entry that you wish to delete, refer to
the Dialing Translation Table"
"Finding an entry in the Dialing
To delete an entry in the Dialing Translation Table:
1. Press
ƒ
·
°
‹.
2. Enter the System Coordinator Mailbox number and
password and press OK.
3. Press
°
°.
4. Press TABLE. If Centrex is installed on your Norstar
system, QUIT is replaced by NEXT.
5. Press CHNG.
6. Press OTHR. The inval* outval* is an example
of a Table entry. The * character shown after a
value signifies any digits in the telephone number
remaining to be dialed. Norstar Voice Mail
automatically adds the * character after every Input
and Output value
7. Press DEL.
8. This transient display shows Deleted and then the
display changes to show the next entry in the table:
9. Repeat steps 6 through 8 for every entry you want to
delete.
The inval2* outval2* is an example of the next
Dialing Translation Table entry.
10. Press
® to end this programming session.
Log:
QUIT RETRY
Admin
MBOX AA OTHR
Dialing
PARM
QUIT
Dial table
ADD
QUIT
inval
*
outval
*
NEXT
inval
*
outval
*
CHNG
FIND
Deleted
inval2
*
outval2
*
NEXT