Nortel Networks NORSTAR VOICE MAIL 4.0 FAX P0886629 - Manual (Page 40)

38 Setting up and maintaining Fax-on-demand mailboxes
FAX Set Up and Operation Guide P0886629 Issue 1.0
Adding a Fax Point
A Fax Point gives a caller access to a Fax-on-demand Mailbox. This mailbox
provides a caller with single-digit access to a fax or list of faxes. If a CCR Tree does
not already exist, you must create one. The Home Menu must exist before you can
add a Fax Point.
For information about adding Fax messages, refer to "Adding a Fax message from
a fax machine telephone" on page 31 or "Adding a Fax message from a disk" on
page 32.
To add a Fax Point:
1. Press
ƒ · ° ‹.
2. Enter the System Coordinator Mailbox number and
password and press OK.
3. Press OTHR.
4. Press CCR.
5. Press ADMIN.
6. Enter the CCR Tree number and press OK. The CCR
Tree number is a number from 1 to 4.
7. Press CHNG.
8. Enter the Path number and press OK.
9. Press OTHR. The x shown in steps 9 to 11
represents the Path number.
10. Press OTHR.
11. Press FAX.
12. Enter the Fax-on-demand Mailbox number.
13. Press PREV to return the caller to the previous point.
Pressing HOME returns the caller to the Home Menu.
Pressing DISC disconnects the call.
Log:
QUIT RETRY
Admin
MBOX AA
Admin
GLIST
OTHR
CCR Admin
CCR tree:
RETRY
Tree: 1
PRINT QUIT
Path:
RETRY END
MENU INFO
XFER LVMSG
ERASE
Mbox:
QUIT
Destination?
PREV HOME DISC