Nortel Networks NORSTAR VOICE MAIL 4.0 FAX P0886629 - Manual (Page 39)

Setting up and maintaining Fax-on-demand mailboxes 37
P0886629 Issue 1.0 FAX Set Up and Operation Guide
Assigning a Home Fax Point
You can assign the Home Point of a CCR Tree as a Fax Point. The Home Point is
the first Point that callers get when they access a CCR Tree. For more information
about the Home Point, refer to the Norstar Voice Mail Set Up and Operation Guide.
If you assign the Home Point as a Fax Point, you cannot add any other Points to this
CCR Tree. Ensure the Fax-on-demand Mailbox is initialized before assigning the
mailbox number to a CCR Tree.
To assign a Home Fax Point:
This completes assigning a Home Fax Point. For more information about designing,
building, changing, saving and enabling a CCR Tree, refer to the Norstar Voice
Mail Set Up and Operation Guide.
1. Press
ƒ · ° ‹.
2. Enter the System Coordinator Mailbox number and
password and press OK.
3. Press OTHR.
4. Press CCR.
5. Press ADMIN.
6. Enter the CCR Tree number and press OK. The CCR
Tree number is a number from 1 to 4.
7. Press BUILD.
8. Press OTHR until you see the display in step 9.
9. Press CHNG.
10. Enter the Fax-on-demand Mailbox number.
11. To save the CCR Tree, press END and follow the
instructions that appear on the display.
12. Press
® to end this programming session.
Log:
QUIT RETRY
Admin
MBOX AA
Admin
GLIST
OTHR
CCR Admin
CCR tree:
RETRY
New tree: <1>
QUIT
0 Home/Menu
REC
OK
0 Home/FOD
OTHR OK
Mbox:
QUIT
Path:
RETRY
OK