Nortel Networks NORSTAR VOICE MAIL 4.0 FAX P0886629 - Manual (Page 41)

Setting up and maintaining Fax-on-demand mailboxes 39
P0886629 Issue 1.0 FAX Set Up and Operation Guide
For more information about designing, building, changing, saving or enabling a
CCR Tree, refer to the Norstar Voice Mail Set Up and Operation Guide.
Changing a Fax Point
From CCR, you can change the Fax-on-demand Mailbox number and destination
of a Fax Point. To change the greeting, call method or Fax messages available, you
must open the Fax-on-demand Mailbox via
ƒ · ° ⁄. For information
about changing the parameters of Fax-on-demand Mailboxes, refer to "Changing
the parameters of a Fax-on-demand Mailbox" on page 28.
To change a Fax Point:
14. To save the Tree, press END and follow the
instructions that appear on the display.
15. Press
® to end this programming session.
1. Press
ƒ · ° ‹.
2. Enter the System Coordinator Mailbox number and
password and press OK.
3. Press OTHR.
4. Press CCR.
5. Press ADMIN.
6. Enter the CCR Tree number and press OK. The CCR
Tree number is a number from 1 to 4.
7. Press CHNG.
8. Enter the Fax Point Path number and press OK.
9. Press CHNG. The x represents the Path number.
10. Press NEXT.
11. Press CHNG. The type shown on this display is the
current destination type.
Path:
RETRY
OK
Log:
QUIT RETRY
Admin
MBOX AA
Admin
GLIST
OTHR
CCR Admin
CCR tree:
RETRY
Tree: 1
PRINT QUIT
Path:
RETRY END
Fax
ERASE OK
Mbox:
CHNG
Dest:
OK