NEC uPD780328 Subseries - Manual (Page 18)

CHAPTER 3 INSTALLATION
User’s Manual U16214EJ1V0UM
18
3.1 Connection
(1) Connection with IE-78K0-NS or IE-78K0-NS-A main unit
See the IE-78K0-NS User’s Manual (U13731E) for a description of how to connect the IE-780338-NS-EM1 to
the IE-78K0-NS.
See the IE-78K0-NS-A User’s Manual (U14889E) for a description of how to connect the IE-780338-NS-EM1 to
the IE-78K0-NS-A.
(2) Connection with emulation probe
The following shows how to connect the emulation probe to the IE-780338-NS-EM1.
On this board, connect the emulation probe SWEX-120SE-1 to CN5.
Caution Incorrect connection may damage the IE system.
Be sure to read the emulation probe’s user’s manual for a detailed description of the
connection method.
<1> Unfasten one of the screws at the bottom of the connector on the IE system side of the emulation probe
SWEX-120SE-1, and connect and screw on the tip of the FG cable.
Figure 3-1. Connection Between FG Cable and Emulation Probe
Emulation probe
SWEX-120SE-1 (sold separately)
FG cable (supplied with IE-780338-NS-EM1)
Connection connector to
IE-780338-NS-EM1