NETGEAR 7000 Series Managed Switch User Manual
Page 88
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
9-12
Access Control Lists (ACLs)
v1.0, May 2008
b. Under Configure Routes, make the following selection and enter the following
information:
•
Select Static from the Route Type pulldown menu.
•
In the Network Address field, enter 192.168.40.0.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Next Hop IP Address field, enter 192.168.200.2.
c.
Click Add.
6. Create a static route with IP address 192.168.50.0/24:
a. From the main menu, select Routing > Routing Table > Basic > Route Configuration. A
screen similar to the following displays.
b. Under Configure Routes, make the following selection and enter the following
information:
•
Select Static from the Route Type pulldown menu.
•
In the Network Address field, enter 192.168.50.0.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Next Hop IP Address field, enter 192.168.200.2.
c.
Click Add.
Figure 9-8